Heads for HeadCase 1.53 & above [AT]

AcmeBarGig Plugins
User avatar
atalwar
Posts: 389
Joined: Fri Jul 07, 2006 7:00 pm
antispam: 0
Location: Delhi
Contact:

Heads for HeadCase 1.53 & above [AT]

Postby atalwar » Mon Apr 30, 2012 9:20 pm

Guys, I'll be using this thread to Post Some of my HeadCase Heads as Time Permits.

Here are a Few for Starters:
Reaktive X01

Image


Reaktive X02 : Based on Reaktive X01, but with a Modded ToneStack.
Image

Steel Bollocks : Very Hi-Mid Trebly Amp with Certain Peculiar Tone. (Might need Hi-Fizz taming either in suite, or through eq)
Image

******************************************************************************************************

A Note About using these heads with Current Lite Versions: When using suite you might need to turn the master Volume down quite a bit (to 1) as compared to builder or use limiter.

~amit

Head Install instructions:
#1: Right CLick and Save the Above Heads (images)
#2: Launch Headcase Install head or install Head Lite.exe (depending on your version of HeadCase)
#3: Browse for these Heads (image files) and load and install (one by one).
#4(optional): You may also drag and drop these downloaded image files on the install head.exe / install head lite.exe icon to install these heads.
Last edited by atalwar on Mon Apr 30, 2012 9:44 pm, edited 3 times in total.
Once a Head Case, Always HeadCase.

Current Gear:
Guitars: PRS Singlecut Korina (SD JB set), Ibanez S470 (SD Distortion set),Pimped up Squier CV 60's Strat/BPNCS, Epiphone Acoustic,Aria Jazz Bass,

Amps/Pedals: VHT Special 6 Ultra Stack ,BlackStar 1HR Amp, SD Twin Tube, Catlinbeard DLS MKIII, Roland Cube 30x, Zoom G1Xon MultiFx, NUX OD-2 Overdrive, NUX EQ-7, Korg Exp2 Pedal, Roland DP10 pedal,

Keys: Korg Pa600 Arranger Keyboard, Korg Kronos 2 61 Key Workstation,Samson Graphite 49 Midi controller.

Recording: Shure Beta58, SM57, Nova Condenser Mic, Presonus Eris E5 Monitors,Steinberg UR44, Yamaha MG10XU Mixer, Behringer Ultra G DI100,,Paradigm Reference Speakers.
....not nuff time.

User avatar
atalwar
Posts: 389
Joined: Fri Jul 07, 2006 7:00 pm
antispam: 0
Location: Delhi
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby atalwar » Mon Apr 30, 2012 9:21 pm

**reserved for future use***
Once a Head Case, Always HeadCase.

Current Gear:
Guitars: PRS Singlecut Korina (SD JB set), Ibanez S470 (SD Distortion set),Pimped up Squier CV 60's Strat/BPNCS, Epiphone Acoustic,Aria Jazz Bass,

Amps/Pedals: VHT Special 6 Ultra Stack ,BlackStar 1HR Amp, SD Twin Tube, Catlinbeard DLS MKIII, Roland Cube 30x, Zoom G1Xon MultiFx, NUX OD-2 Overdrive, NUX EQ-7, Korg Exp2 Pedal, Roland DP10 pedal,

Keys: Korg Pa600 Arranger Keyboard, Korg Kronos 2 61 Key Workstation,Samson Graphite 49 Midi controller.

Recording: Shure Beta58, SM57, Nova Condenser Mic, Presonus Eris E5 Monitors,Steinberg UR44, Yamaha MG10XU Mixer, Behringer Ultra G DI100,,Paradigm Reference Speakers.
....not nuff time.

User avatar
atalwar
Posts: 389
Joined: Fri Jul 07, 2006 7:00 pm
antispam: 0
Location: Delhi
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby atalwar » Mon Apr 30, 2012 9:22 pm

**reserved for future use***
Once a Head Case, Always HeadCase.

Current Gear:
Guitars: PRS Singlecut Korina (SD JB set), Ibanez S470 (SD Distortion set),Pimped up Squier CV 60's Strat/BPNCS, Epiphone Acoustic,Aria Jazz Bass,

Amps/Pedals: VHT Special 6 Ultra Stack ,BlackStar 1HR Amp, SD Twin Tube, Catlinbeard DLS MKIII, Roland Cube 30x, Zoom G1Xon MultiFx, NUX OD-2 Overdrive, NUX EQ-7, Korg Exp2 Pedal, Roland DP10 pedal,

Keys: Korg Pa600 Arranger Keyboard, Korg Kronos 2 61 Key Workstation,Samson Graphite 49 Midi controller.

Recording: Shure Beta58, SM57, Nova Condenser Mic, Presonus Eris E5 Monitors,Steinberg UR44, Yamaha MG10XU Mixer, Behringer Ultra G DI100,,Paradigm Reference Speakers.
....not nuff time.

Vasyl Mishchenko
Posts: 587
Joined: Wed Sep 14, 2011 5:35 pm
antispam: 6
Location: Ukraine
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Vasyl Mishchenko » Tue May 01, 2012 3:15 am

haha man :D your heads are awesome! thank you very much!

User avatar
Ken McLaren
Posts: 3134
Joined: Mon Mar 02, 2009 7:15 am
antispam: 0
Location: Hamilton, Ontario
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Ken McLaren » Tue May 01, 2012 7:12 am

Damn.. I thought I adjusted the volume in the suite... OK to do list again.. :)

User avatar
sjc
Posts: 283
Joined: Thu Dec 24, 2009 9:34 am
antispam: 6
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby sjc » Tue May 01, 2012 11:53 pm

This is awesome, looking forward to throwing these in some existing mixes for some different flavors :) I swear with all the heads that you & RockAxe make, along with others, HC is like the Baskin & Robbins of amp software :)

~scott

User avatar
mastermindjacquard
Posts: 1078
Joined: Thu May 07, 2009 5:12 pm
antispam: 6
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby mastermindjacquard » Wed May 02, 2012 1:42 pm

------------------------------------------------------------------------------------------------------------------------------------------------
- PLEASE POST YOUR REQUESTS FOR AMPLIFIERS - (EVEN CUSTOMS JOBBIES!)-
------------------------------------------------------------------------------------------------------------------------------------------------
Image
Soldano SLO-100 1.0 JUST FINISHED!


TAPP Iratus 100w 6L6 1.0
http://www.mediafire-not-allowed.com/?3vgtqx7yil4km0x


Marshall 2555 1.0 A Rock n' Roll Mod JUBILEE
http://www.mediafire-not-allowed.com/?89htyyk4wkssv2a

SUNN ModelT 1.0
http://www.mediafire-not-allowed.com/?v6pbqkkvyfc21z3

Marshall 2555 Metal mod\ JUBILEE
http://www.mediafire-not-allowed.com/?3w8945favebdfva

FRAMUS Cobra 1.01 c detail version Skin UPDATED!
http://www.mediafire-not-allowed.com/?ym00hk2vo8n5dcn

Marshall DSL50 Jcm2000 1.1 UPDATED skin and amp!
http://www.mediafire-not-allowed.com/?0f957y6tej0ae17

59' Fender Bassman 1.0
http://www.mediafire-not-allowed.com/?g17x16ubbq04eng
Image
59' Gender BiasMan Great work by atalwar!
Friedman Dirty Shirley 1.0
http://www.mediafire-not-allowed.com/?46rlrx9e1133oku

FRAMUS Cobra 1.0 c alternate skin version Sharp great work by Noobonic!
http://www.mediafire-not-allowed.com/?kfp0rhafkhq9emo

FRAMUS Cobra 1.0 b alternate skin version BLK great work by atalwar!
http://www.mediafire-not-allowed.com/?ls7ab5t3detvxqm

CASWELL #39 1.1b(Marshall 1959t MOD) alternate skin version .great work by dalton!
http://www.mediafire-not-allowed.com/?jp3kykdqi18awod

CASWELL #39 1.1(Marshall 1959t MOD) JUST FINISHED!
http://www.mediafire-not-allowed.com/?x6d33y906rqvrgt

BOGNER uberschall 1.1 JUST UPDATED!
http://www.mediafire-not-allowed.com/?j73h7wld58sw82b

BOGNER uberschall 1.0
http://www.mediafire-not-allowed.com/?8t8p4cecf5940n7

Marshall DSL50 JCM2000 1.0
http://www.mediafire-not-allowed.com/?05decmf2w8jsb9u

Marshall JCM 800 1.0
http://www.mediafire-not-allowed.com/?qzv19sqd3c7y1ud

FRAMUS COBRA 1.0 special thanx to atalwar for the amazing skin!
http://www.mediafire-not-allowed.com/?ekb0kua8c4qse2j

Rivera Knucklehead 100watt El34 1.0
http://www.mediafire-not-allowed.com/?5o4463xb9rsnp9r

Diezel Herbert 120watt 6l6gc 1.1 (adjusted low end response)
http://www.mediafire-not-allowed.com/?mb1m18hmt8jd8dm

Diezel Herbert 120watt 6l6gc 1.0
http://www.mediafire-not-allowed.com/?abf3t2gx9cc1ckg

DUMBLE ODS 100 watt combo 1.0
http://www.mediafire-not-allowed.com/?gesgq3g9bzugewq


FORTIN MODDED MARSHALL 2203 100watt head version 1.0 (if you have it already
http://www.mediafire-not-allowed.com/?wm820wnjaz7l2n4
Great work by atalwar on the "Fortinifier 1.0
Image

BOGNER goldfinger 45 watt head version 1.0 (if you have it already)
http://www.mediafire-not-allowed.com/?c8338378o7ddtqt

updated ENGL fireball 100 watt less bass version(Studio version) 1.1( if you have it already)
http://www.mediafire-not-allowed.com/?5gvb0yxeynivh9z

ENGL fireball 100 watt el34 LIVE version (1.0)
http://www.mediafire-not-allowed.com/?dkfdnl406z8mkgp
Last edited by mastermindjacquard on Sat May 12, 2012 11:44 am, edited 8 times in total.

Vasyl Mishchenko
Posts: 587
Joined: Wed Sep 14, 2011 5:35 pm
antispam: 6
Location: Ukraine
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Vasyl Mishchenko » Fri May 04, 2012 7:55 pm

Hey, Amit, that "LOTTA GAIN HELLUVA PAIN" is my fav of yours now! It's really cool, man! My appreciation and respect advanced.

2qiller2
Posts: 17
Joined: Sun Jan 31, 2010 9:48 pm
antispam: 6
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby 2qiller2 » Fri May 04, 2012 8:17 pm

Yaay, I love your Steel Bollocks amp, it's great for that 80's sound :D

User avatar
atalwar
Posts: 389
Joined: Fri Jul 07, 2006 7:00 pm
antispam: 0
Location: Delhi
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby atalwar » Fri May 04, 2012 8:56 pm

Thx guys,
Steel Bollocksamp started as Randy Rhoads tone head but somewhere down the way and versions I swayed from the original context and ended up with what we have.
Once a Head Case, Always HeadCase.

Current Gear:
Guitars: PRS Singlecut Korina (SD JB set), Ibanez S470 (SD Distortion set),Pimped up Squier CV 60's Strat/BPNCS, Epiphone Acoustic,Aria Jazz Bass,

Amps/Pedals: VHT Special 6 Ultra Stack ,BlackStar 1HR Amp, SD Twin Tube, Catlinbeard DLS MKIII, Roland Cube 30x, Zoom G1Xon MultiFx, NUX OD-2 Overdrive, NUX EQ-7, Korg Exp2 Pedal, Roland DP10 pedal,

Keys: Korg Pa600 Arranger Keyboard, Korg Kronos 2 61 Key Workstation,Samson Graphite 49 Midi controller.

Recording: Shure Beta58, SM57, Nova Condenser Mic, Presonus Eris E5 Monitors,Steinberg UR44, Yamaha MG10XU Mixer, Behringer Ultra G DI100,,Paradigm Reference Speakers.
....not nuff time.

User avatar
Ken McLaren
Posts: 3134
Joined: Mon Mar 02, 2009 7:15 am
antispam: 0
Location: Hamilton, Ontario
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Ken McLaren » Sat May 05, 2012 1:50 pm

atalwar wrote:Thx guys,
Steel Bollocksamp started as Randy Rhoads tone head but somewhere down the way and versions I swayed from the original context and ended up with what we have.

I think and I'm guessing here, the trick to the RR sound would be to add a Moving Peak knob in the tonestack and set oit for somewhere between 800-1200 Hz. Or, maybe add one in the poweramp..?
Just a guess..

Sparky80
Posts: 3
Joined: Fri Oct 31, 2014 4:10 pm
antispam: 6
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Sparky80 » Sat Nov 08, 2014 8:33 pm

Is there any way of getting the Sunn Model T head?

User avatar
Ken McLaren
Posts: 3134
Joined: Mon Mar 02, 2009 7:15 am
antispam: 0
Location: Hamilton, Ontario
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Ken McLaren » Sun Nov 09, 2014 2:54 am

I'll let someone else answer that.. :) I thought there was something like that somewhere?

However, as with all HC heads, these are interpretations based on the creators ear and may not have any hard data to substantiate. :) Now having said that, these guys can get pretty damn close.. :)

fuzzboat
Posts: 36
Joined: Wed Nov 19, 2008 4:17 pm
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby fuzzboat » Sun Nov 09, 2014 5:43 pm

You want heads - I got a stash of heads from the old site !!


http://www.uploadmb.com/dw.php?id=1415554820

the sunn might be in there ~ no promises thou

enjoy :alien:

User avatar
Ken McLaren
Posts: 3134
Joined: Mon Mar 02, 2009 7:15 am
antispam: 0
Location: Hamilton, Ontario
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Ken McLaren » Mon Nov 17, 2014 6:55 pm

I get bad gateway error.

fuzzboat
Posts: 36
Joined: Wed Nov 19, 2008 4:17 pm
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby fuzzboat » Tue Nov 18, 2014 2:49 am

Ken McLaren wrote:I get bad gateway error.


Ken

just tried it and its still working/downloading for me A-OK (firefox ver12)

the page does a 5 second count and then it changes to the download page - just click
the "download" link - it that fails then there the link at the bottom "Your download will begin shortly...or click here to Download the file now" to manually DL it


when I try a direct DL via
(http://www.uploadmb.com/file.php?id=141 ... /HEADS.rar)
I get a error "Invalid Entry, the file already downloaded or your browser cookie/referrer is disabled"

so maybe, it might be a browser issue ?

I'll PM you my backup address :alien:

User avatar
Ken McLaren
Posts: 3134
Joined: Mon Mar 02, 2009 7:15 am
antispam: 0
Location: Hamilton, Ontario
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Ken McLaren » Wed Nov 19, 2014 2:51 am

Thanks man, got it..

Sparky80
Posts: 3
Joined: Fri Oct 31, 2014 4:10 pm
antispam: 6
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Sparky80 » Fri Nov 21, 2014 2:41 pm

Thank you for the link!!! Really appreciated :cheers:

Vasyl Mishchenko
Posts: 587
Joined: Wed Sep 14, 2011 5:35 pm
antispam: 6
Location: Ukraine
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Vasyl Mishchenko » Tue May 31, 2016 4:35 pm

fuzzboat wrote:You want heads - I got a stash of heads from the old site !!


http://www.uploadmb.com/dw.php?id=1415554820

the sunn might be in there ~ no promises thou

enjoy :alien:

Man, thanks a lot, found some heads here nowhere else available.

Vasyl Mishchenko
Posts: 587
Joined: Wed Sep 14, 2011 5:35 pm
antispam: 6
Location: Ukraine
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby Vasyl Mishchenko » Sun Jun 05, 2016 12:13 pm

atalwar wrote:Image


This one is very special, Amit. Thank you, my friend. It's one of my faves.

User avatar
atalwar
Posts: 389
Joined: Fri Jul 07, 2006 7:00 pm
antispam: 0
Location: Delhi
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby atalwar » Mon Jun 06, 2016 1:17 pm

mm glad that you like it bro!
Once a Head Case, Always HeadCase.

Current Gear:
Guitars: PRS Singlecut Korina (SD JB set), Ibanez S470 (SD Distortion set),Pimped up Squier CV 60's Strat/BPNCS, Epiphone Acoustic,Aria Jazz Bass,

Amps/Pedals: VHT Special 6 Ultra Stack ,BlackStar 1HR Amp, SD Twin Tube, Catlinbeard DLS MKIII, Roland Cube 30x, Zoom G1Xon MultiFx, NUX OD-2 Overdrive, NUX EQ-7, Korg Exp2 Pedal, Roland DP10 pedal,

Keys: Korg Pa600 Arranger Keyboard, Korg Kronos 2 61 Key Workstation,Samson Graphite 49 Midi controller.

Recording: Shure Beta58, SM57, Nova Condenser Mic, Presonus Eris E5 Monitors,Steinberg UR44, Yamaha MG10XU Mixer, Behringer Ultra G DI100,,Paradigm Reference Speakers.
....not nuff time.

clubZa
Posts: 7
Joined: Fri Nov 11, 2016 3:20 am
antispam: 6
Contact:

Re: Heads for HeadCase 1.53 & above [AT]

Postby clubZa » Sat Dec 03, 2016 6:59 am

the sunn might be in there ~ no promises thou :cheers: :cheers:

ruby888


Return to “AcmeBarGig Plugins”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 3 guests